Track loader repairs

  • күнү жарыяланды Ай мурун

    Andrew Camarata

    узактыгы: 1:04:53

    Working on a 1960's Caterpillar 955h crawler loader:
    0:00 bring in garage
    1:29 New top roller
    4:57 Remove exhaust elbow
    14:13 new seat
    22:05 Install new exhaust elbow
    23:45 Demonstrate bad starter
    25:20 Install muffler
    27:18 remove starter to get rebuilt
    31:46 Demonstrate roller not turning
    33:11 Engine oil change
    35:35 digging in shale
    45:41 Make exhaust gasket
    49:10 more digging, also using a Ex100 excavator, Cat 950 wheel loader, and Takeuchi TL12 compact track loader
    Ebay roller listing: (the winning bidder refused to pay) www.ebay.com/itm/184739763847

Timothy Gilbert
Timothy Gilbert

Does he respond

6 саат мурун
Andrew Camarata
Andrew Camarata

Me? I do.

6 саат мурун
julio hernandez
julio hernandez

Qué restauración más chaspurria.

9 саат мурун
Alexei Tetenov
Alexei Tetenov

Thanks for sharing!

Күн мурун
René Videa
René Videa

any plans to buy a road grader or you got one?? love ur channel. greeting from CR.

2 күн мурун
mc see
mc see

Memo to self - A bigger bucket next oil change on the Track Loader. lol

2 күн мурун
bigliftm
bigliftm

owwhhh myyy gaawdddd hillbilly mechanics... blowtourch on turbo.... chizel on turbo and to complete the disaster :drilling out and cutting up the damaged threads (sharp shavings fall into the turbo. ) Good luck with that

3 күн мурун
Richard
Richard

My dad taught me ohh about 35years ago, if your digging into a bank and it's hard as rock. Just side it, catch it with the side of the blade till you break up the surface. Then dig like crazy and have fun!👍

4 күн мурун
Henry Bagwell
Henry Bagwell

Andrews next project, remove a mountain, build a big shed for all my equipment.

5 күн мурун
Nabil Samah
Nabil Samah

What are going to do with these two containers?

5 күн мурун
GRW
GRW

“Great present for a 6 year old…he can roll it around his room” Lolol

7 күн мурун
Dale Charbonneau
Dale Charbonneau

get the rain cap om you muffler !!! if rain or snow gets in and melts will and can take out your engine 37 years as a diesel tech and have seek skiders loose their engines

7 күн мурун
TrueResonance
TrueResonance

Thats what I appreciate about you, Andrew, you're never afraid to get out the torch.

7 күн мурун
Darin Cooper
Darin Cooper

If there wasn't anything needlessly destroyed did I even watch an Andrew Camarata video?

8 күн мурун
majid chemri
majid chemri

for some of your repairs and before installing new parts!......grinding of rusted surfaces you really really need a fairly decent BELT GRINDER AND a good one too. god bless all

10 күн мурун
Willi Correa
Willi Correa

Me encanta la casa que construyó co vatios contenedores quedó genial

11 күн мурун
Willi Correa
Willi Correa

Porque hay tanto árbol seco en los terrenos que Ud frecuenta willi correa desde Cartago valle Colombia lo veo SIEMPRE y admiro mucho su trabajo

11 күн мурун
Hickory Dragon
Hickory Dragon

Love the success at 35:00! Just need some o-ill

11 күн мурун
Ron Mcmahon
Ron Mcmahon

You make me crazy 🙉 You never fix anything 1/2 Ass You always fix it right the first time no short cuts Your Amazing. !!!! 🥂 🐕

12 күн мурун
JJ Mazza
JJ Mazza

Lmfao Andrew got a snap, listen at 17:44

12 күн мурун
James Phelan
James Phelan

Brilliant video again that roller is a joke I wonder when u hammered it in was it butting up against its housing just a thought that would drive me mad ha

12 күн мурун
Kemontae Fisher
Kemontae Fisher

@20:35 Ahhh! My eyes!

13 күн мурун
Gene Smith
Gene Smith

How has the Camarata footprint increased from the start to now?

13 күн мурун
Blayk Richardson
Blayk Richardson

I hope you know your living my dream life rn

13 күн мурун
محمد الزهراني
محمد الزهراني

شغل مرتب وفنان ليتني عندك 🙋‍♂️

13 күн мурун
محمد الزهراني
محمد الزهراني

🤙🤙🤙

13 күн мурун
Saad al-shammri
Saad al-shammri

All maintenance you do are worthless,,, I feel bad for you why don’t you clean the machines or any thing before you work on it ???!!

14 күн мурун
Davidnumber23
Davidnumber23

oh its on fire, that's nice .....😁

14 күн мурун
DrMGomezJr
DrMGomezJr

I've enjoyed your channel very much,,, super impressed with what you do...just wondering why you did not paint the seat frame...

15 күн мурун
David Kojis
David Kojis

Them old cats you should let it idle down before shutting them off but she looks like she has been put away wet a couple of times

17 күн мурун
Rod
Rod

When you heat a bolt to remove it,let it cool before you start to turn it, and when it's still fairly hot, put the wd40 to it.youll save a lot more bolts.😎 doing good over there...

17 күн мурун
Daniel Clark
Daniel Clark

Surprised you didn't just get someone in OR do it to ur self and blast that hill out with a controlled charge Andrew good work though awesome as always mate

18 күн мурун
Steve Johnson
Steve Johnson

Is craigslist dead in your area now too? I used to find so much on CL but now everyone seems to use FB marketplace and it's impossible to search, it's totally hit or miss.

18 күн мурун
Michael Hartley
Michael Hartley

heating the bolt expands it, makes it impossible to remove... and makes the bolt weak. It HAS to break. Heat the surround, will often help...

18 күн мурун
Claudiomar Saraçol
Claudiomar Saraçol

show 👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

19 күн мурун
Kenneth Rader
Kenneth Rader

Won’t see me here anymore to many comericals

19 күн мурун
Want a review on something from Amazon let me know
Want a review on something from Amazon let me know

https://youtu.be/nBYlP6jb8fg paint brush restored

20 күн мурун
Tom KI6ASP
Tom KI6ASP

Andrew at his best - fixing stuff and digging stuff up.

20 күн мурун
Carel du Preez
Carel du Preez

Put new injector tips in Andrew. You are underpowered... From South Africa...... Tracks is not spinning under load as it should... Its not good for the transmission.

20 күн мурун
Keith Hill
Keith Hill

This has been a real fun video tk watch. You did a variety of things.

20 күн мурун
Azmi M.
Azmi M.

00:32:45 LOL

20 күн мурун
schottelboot gm detroit diesel
schottelboot gm detroit diesel

Nice video, bud the cat looks nicer whit yellow paint.

21 күн мурун
Gary Pollentine
Gary Pollentine

Have got your own fuel tank you have lots of machines so I assume you get fule delivered to your own tank so you can top up you machines when ever you need

21 күн мурун
brian93ist
brian93ist

Someone's broke the loader off this machine

22 күн мурун
Owen Toal
Owen Toal

7:15 you should have just taken it to the carwash

22 күн мурун
javegis
javegis

Old roller sold for 15200$

22 күн мурун
Andrew Camarata
Andrew Camarata

Guy didn’t pay

22 күн мурун
Larry Littlefield
Larry Littlefield

try free all it makes pb blaster look like water and it real good for cutting oil

22 күн мурун
james bolem
james bolem

good video, once the tracks are on the right way ,a good machine.I was thinking of getting a 955, nice coat of cat yellow needed.

22 күн мурун
Nekot
Nekot

Заебись!

22 күн мурун
Donald Mends
Donald Mends

The welder are Basic AC WELDERS , cheap home do it welder, like Lincoln, Sears,

23 күн мурун
Donald Mends
Donald Mends

Last year I welded a new cutting bit on wheel loader bucket using AC Welder using 6020 Rod had no problem welding.

23 күн мурун
Donald Mends
Donald Mends

Have comment for. Jesse, about welding 6018 with AC Welder. My Cousin who is self tough Welder with lots experience in welding, use AC Welder all the time, plus this day age welding Rods designed to weld with AC welders. I believe his welder is AC Sears welder. He welds fantastic. With it.

23 күн мурун
Donald Mends
Donald Mends

Andrew I believe you and your Friend Jesse are unbelievable mechanical skills, but your Equipment experience are very rough, especially your Excavator skills , no buddy no buddy swing a Loaded Bucket over a cab of a truck, can yo imagine you sitting in a cab of a truck and some one swing shit over your head, it's disaster waiting to happen. Your work ethic unbelievable, diehard workers. Just hate to see someone get hurt. My I have over 40 years of Equipment experience. Keep up the great videos.

23 күн мурун
Frank Hossack
Frank Hossack

Yep anti-seize is your best friend

24 күн мурун
Rad Restorations
Rad Restorations

Man this guy has been putting out quality content for ages. Makes me want to create my own castle in the wilderness. Should I try it?

24 күн мурун
Andrew Camarata
Andrew Camarata

Just watch a few of my videos on that building and copy it. It is a simple design.

20 күн мурун
reedboy217
reedboy217

The “Camarata Castle”

21 күн мурун
reedboy217
reedboy217

Andrew, you should get the schematics of your home build and patent it. You could sell it and make millions.

21 күн мурун
XanDiego
XanDiego

DO IT. JUST DO IT. LET YOU’RE DREAMS COME TRUE

22 күн мурун
phillip mikrot
phillip mikrot

Try it out

22 күн мурун
Fake-Ass Name
Fake-Ass Name

Andrew should seriously considor printing Tshirts with his beautiful words of wisdom

24 күн мурун
H3R3T1C
H3R3T1C

For new/NOS rollers like that, it's probably a good idea to running it back and forth with a chain/band-wrench until it's loosened up before installing the track. If you can barely move it with your hands, the track isn't going to have much more of a grip on it.

24 күн мурун
H3R3T1C
H3R3T1C

As wonky and inefficient as it may be due to friction and tolerance-stacking, the way that loader is set up rubs me in all the right ways. I've always loved complex-cantilever mechanisms. It sorta reminds me of the lift mechanisms on the old-school Earth-Movers/Scrapers my father used to take me out to watch as a child. At my childhood home, there was a massive construction site right across the street. My father built me a sandbox right out in the front-yard, so I could watch the real deal while I was playing with my toys. This was in the late-'80s, which is what I consider to be at the upper-limit of the "Golden-Age" of construction equipment. All of the equipment they used were Cats from the '50s, '60s and '70s. With old equipment (I'll go with Cranes for the sake of the argument), you could find the limits by letting the machine start to tip just a little bit. With modern equipment, if you try to do that, you'll break the machine long before it starts tipping. This is not because they've gotten better at keeping them from tipping. It's because older equipment was over-built, mostly due to the fact that they didn't have computer-analysis to establish the specific working stresses. Newer equipment is under-built, because they know exactly how much stress it's going to see and where, and they play a game of meeting bare-minimum-standards. In the world of modern Cranes, there's no such thing as redundancy. The rating on the crane is the *maximum* it can handle without breaking. It's not a "suggestion" anymore. These days, the proper SOP for moving a 10 ton hot-tub over a house is to bring a 90 tonner, because a 90 ton crane will only pick up 90 tons under *ideal* situations (and ideal situations don't exist). Trying to use a modern 10 ton (or even 15-30 ton) crane for a 10 ton hot-tub would only lead to a disaster.

24 күн мурун
Scott Kernan
Scott Kernan

Dam you not only can you repair that big heavy equipment but run anything as well that's cool

24 күн мурун
Shakdi Dagalimal
Shakdi Dagalimal

OK, I think he made some bitcoin loot. Good investing, BTW. So many machines it's a construction company.

25 күн мурун
Shakdi Dagalimal
Shakdi Dagalimal

Engine cover needs a chain hoist to lift it off and on. *IT'S A MONSTER MACHINE*

25 күн мурун
Dasdfjkl
Dasdfjkl

Is the roller still for sale? I see that the winning bidder refused to pay.

25 күн мурун
Pople BackyardFarm
Pople BackyardFarm

nice loader

25 күн мурун
Whos Askin
Whos Askin

Am I the only one who had an advertisement every 2 minutes and 30 seconds for the whole video... I understand ads but that many...

25 күн мурун
Ronnie Venhorst
Ronnie Venhorst

Very nice video

26 күн мурун
Florian Probst
Florian Probst

You should Pixel the Flash at the welding on every Video whats out right now, this is eyes Killer , someone get the idea to indict you ,because he watch youre Videos and look right into the Flash without a warning before starting or Pixeld the Flash and have problems with eyes. You should do that right away. But nice Video and with a good running time, for me it could be longer 💪👍

26 күн мурун
Markus K.
Markus K.

The flash you see won't ever hurt your eyes, because a video camera and a monitor or smartphone screen will never be able to reproduce the bright flash of an arc weld, because the brightest a screen can get is pure white, thats the backlight color of the light source of a screen. If you're standing nearby a welder without eye protection, that will hurt your eyes, so the smartphone screen acts as a protection, because it limits the light that gets to your eyes.

26 күн мурун
jakehill322
jakehill322

As many people watch your videos I’m shocked no power tool company’s have sent out tools to Andrew for free advertising

26 күн мурун
КАСТЯН ЛЕМАНН
КАСТЯН ЛЕМАНН

Блин...по ходу я единственный русский ,который смотрит это...

26 күн мурун
william miller
william miller

Always a pleasure watching your channel I'm confined now and the long sleep is near.. watching you sir is priceless

27 күн мурун
guy
guy

My thumbs up is for the dog scene.

27 күн мурун
william miller
william miller

How do you heat and cool the castle Mr. Camarata?

27 күн мурун
Patrick Joyce
Patrick Joyce

Where can I get a pair of scissors like that, they are just fantastic.

27 күн мурун
Павел Слесарь
Павел Слесарь

mountain, goodbye!

27 күн мурун
Marauder Mitchelli
Marauder Mitchelli

John Deere backhoe can you fix the windshield?

28 күн мурун
Jeider Mendoza
Jeider Mendoza

J6n

27 күн мурун
Marauder Mitchelli
Marauder Mitchelli

@Andrew Camarata I know you don’t like the backhoe...who does seems excavators rule the world. Years ago we discussed meeting to off-road ride, I just purchased a rzr pro and an excavator. Stay healthy your videos are awesome 🙂

27 күн мурун
Andrew Camarata
Andrew Camarata

can, yes? But its not worth it, almost every piece of glass is missing in that thing.

28 күн мурун
J. A.
J. A.

So many Toys

28 күн мурун
paulus oumata
paulus oumata

👍💪💪💪💪💪💪👍💐

28 күн мурун
Aitor Bleda
Aitor Bleda

What about some cover for the heavy vehicles? that would stop plenty of the deterioration.

28 күн мурун
K Williamson
K Williamson

Might want to take a couple of pics of your wiring diagram in case it ever gets rubbed off.

29 күн мурун
cnote4461
cnote4461

Is it just me - or was anyone else waiting for him to knock that boulder off the hill?!! Lol

29 күн мурун
Mestafa Essafi
Mestafa Essafi

U6u66

25 күн мурун
Seth Wells
Seth Wells

Man I just love how theres timeline titles or whatever you want to call them. Makes it so easy to know where you left off. Where you want to go to. More tubers need to follow your lead Andrew

29 күн мурун
Brandon Stine
Brandon Stine

"I gotta stop breaking stuff at some point." LOL, me just before I take something to a professional. It was cathartic seeing someone blow right past the point of no return and actually finish it. Usually I take my stuff to a shop, smh.

29 күн мурун
Prince Harambe
Prince Harambe

Make some garage for all that equipment.

29 күн мурун
WAVETUBE84
WAVETUBE84

Everything on big rigs and machinery requires big expensive tools. Some ordinary automobile tools will work, but they will show there limitations. It's a paradigm shift in scale. There are similarities between RVs and Commercial Trucks. Especially the braking systems. Servicing and repairing brakes on them is no joke! They have to control a lot of weight! RV owners and big rig operators do not have a choice and pay a premium for those repairs. Because your quality is what they depend on...and they are liable. Most automobile shops won't touch them. Because additional liability insurance, licenses, and certification are required. No big deal: just take the course, test, and pay the fee. THEN ....With a few specialized tools and, possibly, a two hoist lift, you can EARN A LOT OF MONEY! That's just the "price of rice". Maybe a cool gig in the winter months? ...pay for a herd of jet skiis and snowmobiles... and some Bling for yir dog... Just saying.

29 күн мурун
Andreas Pflüger
Andreas Pflüger

the pivot pins of the bucket seem to be loose. should be checked if the bushings are worn out or even still in place. otherwise it will get nasty and/or expensive.....

29 күн мурун
Joe Laughlin
Joe Laughlin

Good job! Keep it up!

29 күн мурун
formerartstudent
formerartstudent

I've never seen that trick with the paper towel. Nice!

29 күн мурун
Joe Kirk
Joe Kirk

I knew a man once who drove a Screw driver in like that to remove a top carrier and when the screw driver came back out Itwent completely through his head killing him instantly. Think about it. There is a better way

29 күн мурун
John Tatum
John Tatum

Nice equipment...fixing the tracks....cool runnings.

29 күн мурун
Gizmo42Rodeo
Gizmo42Rodeo

Fixed just in time to buy 2 more.

29 күн мурун
Joel Losoya
Joel Losoya

😂 you had to change the oil to get that roller working Andrew ! That crazy 😜 oh well it’s at least working great 👍

Ай мурун
Павел Глушков
Павел Глушков

Хорош Катерок! :)

Ай мурун
ARXXIII
ARXXIII

Holy shit!, the roller sold for over 15K O_O

Ай мурун
doug westacott
doug westacott

never mind my initial comment...I see the bend you added.

Ай мурун
doug westacott
doug westacott

Andrew.. maybe add a flapper of the end of the muffler pipe. Keeps the rain/snow out

Ай мурун
bea kittelscherz
bea kittelscherz

This mans wrench is bigger than yours ... lmao . Love to watch this channel. Learn from the best, stay away from the rest :-)

Ай мурун
Gene
Gene

Hackie hack hack!

Ай мурун
Bruce MacGlynn
Bruce MacGlynn

Some guy with Bones N' Sleeves put a gag reel of your greatest bloopers, or just bloopers anyway and I loved it. If you ever feel like do that I would be sure to share. Hilarious.

Ай мурун
Deplorable Irish
Deplorable Irish

Gud tip for siezed bolts is to get them red as close to where their threaded in then pour cold water on them. Water should boil thru the thread cleaning it out.

Ай мурун
Rusty Axle
Rusty Axle

Great video always like to see folks doing some wrenching,you want to get some gold pans and test to see if there is gold in that shale ,it’s a perfect place 👍👍

Ай мурун
Diesel Ramcharger
Diesel Ramcharger

When you heat a bolt. YOU GOTTA LET IT COOL! Its in a hole. it gets hot, it expands. the hole forces it to get longer not fatter. when bolt cools it shrinks. it is now longer and skinnier than it was before. rinse repeat once or twice. cool it with air or penetrating oil like pb blaster. THEN you loosen it up. itll come right out...or itll break. lol

Ай мурун
Diesel Ramcharger
Diesel Ramcharger

Dude youve got to get yourself a crimp on hose clamp set. For fixing air lines, ac hoses etc. super low profile. entire set with crimpers is like 25 bucks. Do It! That bulky mess on your air hose is dog poop. Crimp on clamp. heat shrink it or slide a piece of hose over it and voila no scratch on them perdy tractors. lmao.

Ай мурун

Кийинки

Buying new compact track loaders

46:54

Buying new compact track loaders

Andrew Camarata

Көрүүлөр 901 миӊ.

Cutting down saw mill trees

55:44

Cutting down saw mill trees

Andrew Camarata

Көрүүлөр 1,3 млн

Don’t tell ANYONE how I did this!! #Shorts

0:19

Don’t tell ANYONE how I did this!! #Shorts

Romina Gafur

Көрүүлөр 2,4 млн

Kodak Black - Basement on Fire [Official Music Video]

3:07

Kodak Black - Basement on Fire [Official Music Video]

Kodak Black

Көрүүлөр 1,2 млн

Mining 1,000,000 Blocks Alone!

9:00

Mining 1,000,000 Blocks Alone!

MrBeast Gaming

Көрүүлөр 14 млн

Buying and fixing a dump truck: 96 Freightliner FL70 w/ 8.3 cummins

2:02:55

Closing in the container castle

1:49:48

Closing in the container castle

Andrew Camarata

Көрүүлөр 3,5 млн

Buying and fixing a dozer : John Deere 450

1:40:57

Buying and fixing a dozer : John Deere 450

Jesse Muller

Көрүүлөр 2,2 млн

Buying an excavator auger attachment

35:44

Buying an excavator auger attachment

Andrew Camarata

Көрүүлөр 1,5 млн

Dump truck paint and new trailer

57:14

Dump truck paint and new trailer

Andrew Camarata

Көрүүлөр 2,2 млн

The Worst Excavator Recovery Of My Career

41:10

The Worst Excavator Recovery Of My Career

letsdig18

Көрүүлөр 11 млн

Installing a gravel pad for a camper

1:13:23

Installing a gravel pad for a camper

Andrew Camarata

Көрүүлөр 2,7 млн

The New Massive Volvo EC950F Excavator

47:03

The New Massive Volvo EC950F Excavator

letsdig18

Көрүүлөр 144 миӊ.

Don’t tell ANYONE how I did this!! #Shorts

0:19

Don’t tell ANYONE how I did this!! #Shorts

Romina Gafur

Көрүүлөр 2,4 млн

Kodak Black - Basement on Fire [Official Music Video]

3:07

Kodak Black - Basement on Fire [Official Music Video]

Kodak Black

Көрүүлөр 1,2 млн

Mining 1,000,000 Blocks Alone!

9:00

Mining 1,000,000 Blocks Alone!

MrBeast Gaming

Көрүүлөр 14 млн